XLR C6 Competition Cheekpiece
Introducing the all-new XLR Competition Cheekpiece for the C6 Buttstock!!!
Due to popular demand, we have designed one of our improved cheek rests for the XLR chassis. This cheekpiece allows you to get a consistent head placement behind the scope every time, which helps with repeatability, and consistency.
This cheekpiece was designed for the C6 Buttstock from XLR. This is the buttstock that comes with the XLR Envy Pro w/ PRS Competition Kit which can be found here.
This cheekpiece is not compatible with the TR2 buttstock from XLR.
Here are the installation instructions
All of our cheekpieces are now printed with the new material, ABS. ABS and can be further chemically smoothed using Acetone. For a DIY project you can research ABS Acetone chemical smoothing and using a fairly simple procedure achieve a high gloss finish. Bison Tactical recommends the “Smoother” surface for this procedure.
Utilizing a new design, there is now the ability to adjust the position of the cheekrest forward and back, depending on your preference, and facial structure.
Here is a video from the NSSF about head position behind the rifle. Here is a link to the source page.3D
3D Printed in small batches at our shop in Boulder, Colorado
| Weight | N/A |
|---|---|
| Dimensions | 5 × 2 × 2 in |
| Surface | Normal, Smoother |